12.1" highbrightness 1500 nit LCD kit w/LED backlight (bulk w/video controller & inverter), 1024 x 768 res 750:1 ., VGA and DVI input 13Watts, operating temperature range, from -30 to +70oC, Open Frame kit without Rear housing (Model: LOPH1210-Kit-LED)

Overview
Download

The LOPH1210-Kit-LED is a 12.1" sunlight readable LCD module. The module consists of a ChiMei G121X1-L01 TFT color LCD panel and a VHB (very high brightness) LED backlight. At the full brightness setting, the LCD screen lumiannce can reach 1,600 Cd/m2 (nits). At this level, the total backlight power consumption is only 13Watts, which is about half the power required of a CCFL backlight at the same screen brightness. With 1,600 nits screen brightness, the display is highly readable under bright ambient lighting, including direct outdoor sunlight. Also, the ChiMei G121X1-L01 is an industrial LCD with an extremely wide operating temperature range, from -30 to +70oC, making this LCD module specifically suitable for demanding outdoor applications.

Specifications:

Parameters	Typical Value	Units	Conditions

LCD Screen Luminance	1,600	Cd/m2	LCD in OFF state (normally White)
Luminance Uniformity	20% or better		(Note 3)
Backlight Power Consumption	13	Watts	Total power to the LED driver board
Screen Luminance Dimming Ratio	500:1		With LD200 LED driver board
Typical LCD Contrast Ratio	750:1		White vs. Black (measured in the dark along the normal direction)
Typical Viewing Angles
3:00 directions	80	Degrees	Contrast ratio ≥ 10
9:00 direction	80	Degrees	Contrast ratio ≥ 10
6:00 direction	80	Degrees	Contrast ratio ≥ 10
12:00 direction	80	Degrees	Contrast ratio ≥ 10
LCD Screen Chromaticity (x, y)
White	(0.298, 0.328)		Measured at the normal direction
Red	(0.557, 0.371)		Measured at the normal direction
Green	(0.331, 0.543)		Measured at the normal direction
Blue	(0.145, 0.111)		Measured at the normal direction
Response Speed
Rise time	6	msec	White to Black, 10% - 90% transition
Fall time	17	msec	Black to White, 10% - 90% transition
LCD Module Weight	850	Grams

Note 1: Please refer to ChiMei G121X1-L01 LCD Specification for detailed electrical specifications and general precautions.
Note 2: All data is measured at 25o C ± 2oC ambient temperature.
Note 3: Uniformity = (Lmax - Lmin) / (Lmax + Lmin) where Lmax (Lmin) is the maximum (minimum) luminance measured using a 10
mm diameter meter aperture over the LCD active area, except the last 10 mm area from the edges.

Data Sheet

12.1" highbrightness 1500 nit LCD kit w/LED backlight (bulk w/video controller & inverter), 1024 x 768 res 750:1 ., VGA and DVI input 13Watts, operating temperature range, from -30 to +70oC, Open Frame kit without Rear housing (Model: LOPH1210-Kit-LED)