24" Metal-5mm / Front IP65 / Panel Mount / VESA Mount / 1920x1080 / 1000nits / VGA Input / Rear OSD -20~70C (Model: YPMW2400IPHBWT)

24" Metal-5mm / Front IP65 / Panel Mount / VESA Mount / 1920x1080 / 1000nits / VGA Input / Rear OSD  -20~70C (Model: YPMW2400IPHBWT)

24" Metal-5mm / Front IP65 / Panel Mount / VESA Mount / 1920x1080 / 1000nits / VGA Input / Rear OSD -20~70C (Model: YPMW2400IPHBWT)

Main Feature

    • Sunlight Readable.
    • 24" Full-HD TFT LCD with resolution up to 1920x1080.
    • Suitable for military, tablet, ruggedized PC, kiosk, advertising, POS, marline, transportation, gaming, gas pump.
YPMW2400IPHBWT
  • Overview
  • Specifications
  • Download
  • Contact Sales

Clamp Mount

 
 

Installation Guide for Panel Mount Product:

You better have at least 2 people to do the installation. One is at the front side of the mounting wall, another is at the back side of the mounting wall.
 
 
1. Get the Mechanical Drawing :
You can get the mechanical drawing of your product model from our web site : www.itechlcd.com . If you can't find the correct mechanical drawing, contact your local dealer.

2. Make the cut out :

There is the cut out dimension in the Mechanical Drawing. Make sure your cut out meet the cut out dimension requirement. If the cut out is too small, there will be some interference. If the cut out is too big, you can't have the panel
mounting securely. Please note that there is thickness limitation of the mounting wall for panel mount installation.

3. Prepare the accessory :

For panel mounting kit installation, you will receive mounting kits and screws together with your unit and you have to prepare the screw driver by yourself. There are at least 2 mounting kits for each side of the panel. The mounting kit and the screw is paired.

4. Installation :
4-1. Put the monitor in the cut out from the front side of the mounting wall. The best way to mount the panel is to align the bottom of the panel housing with the bottom edge of the cut out. This way can help hold the panel steadily.
 
 
4-2. At the back side of the mounting wall, insert the mounting kits into the slide hole at the side bracket on the panel.
4-3. Put the screw on the mounting kits and screw it tightly.
4-4. Finish all the mounting kits one by one then you can have a secure installation for your Panel Mount product.
 
Item Specification
Panel Type 24-inch TFT LCD
Screen Diagonal 24-inch
Active Display Area (mm) 531.36 (H) x 298.89(V)
Pixel Pitch (um) 276.75 (per one triad) x 276.75
Number of Pixels 1920 x 1080
Contrast Ratio 3000: 1
Color Arrangement R.G.B. Vertical Stripe
Brightness (cd/m˛) 1000 cd/m˛
Viewing Angle(Typ.) 89/89/89/89 (R/L/U/D)
Signal Connector VGA Input
Power Source AC100 ~ 240V, Universal +/- 10%
Power Consumption 45(Typ)
Power Management VESA DPMS Compliant
Operating Temperature -20~ 70°C
Storage Temperature -20 ~ 60°C
Plug & Play VESA DDC 1/2B
Sales Inquiry
Sales Phone: 888-483-2418/Press 2
510-226-9226/Press 2

Email: sales@itechlcd.com