Hardware Specification: |
System |
CPU |
Intel socket 775 C2D CPU, max speed: 2.66G, max power consumption 65W
CPU list:
CORE 2 DUO 2.66G E6700 / CORE 2 DUO 2.13G E6400
CORE 2 DUO 2.6G E4700 / CORE 2 DUO 1.8G E4300
CORE 2 DUO 2.4G E6600 / Celeron 800MHz 440 |
FSB |
1066MHz / 800MHz / 533MHz |
Chipset |
Intel® Q965 chipset:
•North bridge: Intel Q965 Graphic Memory Controller Hub (GMCH) (25W)
•South bridge: Intel ICH8 I/O Controller Hub (5W) |
VGA |
Intel Q965 integrated graphic subsystem (GMA3000) |
Audio |
Realtek ALC268 AC97 Audio Codec 2+2 channels |
LAN |
Realtek 8111B 10/100/1000 Mbps LAN x 2 |
Memory |
Two 240-pin DDRII 533/667/800 DIMM sockets, dual channels, supports max.
4 GB system memory |
I/O |
Intel ICH8 I/O controller Hub |
Serial ATA |
SATA II, Data transfer rates up to 3.0 Gb/s (300 MB/s), 2 on mother board, 2 on
connection board |
Serial port |
RS232 x 1 / RS232,422,485 x 1 |
Parallel port |
Compatible with IBM parallel port x 1
Support Enhanced Parallel Port(EPP) – Compatible with IEEE 1284 specification
Support Extended Capabilities Port(ECP) – Compatible with IEEE 1284 specificatio |
IEEE1394a |
firewire port x 1 (design in, option, supports provisions of IEEE 1394-1995 Standard
for High Performance Serial Bus 1.0 and 1394a-2000) |
USB |
USB 2.0 x 8 (external x 4 on mother board, internal x 4 on connection board) |
DVI |
On DVI board, DVI-D port x 2 (one link with AD board, one to computer I/O side) |
VGA |
On connection board, VGA out x 1 |
GPIO |
* Support 8 General Purpose Input (GPI), TTL level
* Support 8 General Purpose Output (GPO), TTL level
* 5V
* internal pin heads on mother board * External connector on computer module (option) |
WDT |
1~252 minutes, software programmable |
Display |
Resolution |
1920x1080 |
Luminance(nits) |
500 |
View Angle |
(U/D/R/L,CR>20) 88/88/88/88 |
Contrast Ratio |
4000:1 |
Touch |
Type |
Infrared rays interception detection form |
Glove |
Yes |
Minimum Stylus Size |
8mm |
Hardness (Mohs) |
7 |
Glass thickness |
3.0(+/-0.3)mm toughened glass |
Storage |
HDD |
3.5” SATAII HDD drive bay x 1, Max storage size: 1TB
With tray for easy replacement |
Expansion |
PCI-E mini card slot |
Single 52-pin card-edge type, x1 |
PCI-Ex16 |
Compatible to the PCI Express* Base Specification revision 1.1a x1 |
PCI-Ex1 |
Compatible to the PCI Express* Base Specification revision 1.1a x1 |
External I/O on computer side |
USB |
USB 2.0 x 4 |
COM |
RS232 x 1 |
LAN |
RJ-45 x 2 (Gigabit Ethernet) |
KB/Mouse |
PS/2 Keyboard x1 & Mouse x 1 |
Audio |
Line-in, Mic-in, Line out audio jacks |
DVI-D output |
x 1 |
IEEE1394 |
Fire wire *1 (option) |
GPIO connector |
8 in 8 out (option) |
VGA output |
x 1 |
VGA input |
x 2 |
DVI-I input |
x 1 |
RS232 |
x 1 |
Power |
Power Input |
Direct AC connector, ATX power supply to computer board, 100~240VAC,50/60Hz, 3.6A |
Power consumption and Ampere |
Display only: 249W, 3A
With computer module: 320W, 3.6A |
Power Switch |
IEC320 type, at AD board I/O side, x1 |
Reset switch |
Huafeng Electronic HF606, at computer I/O side, x1 |
LED status indicator |
Power and HDD indicator at computer board external I/O side
(LED colors: Power: Green / Orange: HDD accessing) |
Mechanical & Environmental |
Mainbody |
SECC, black (Panton no. 8238) |
Operating Temperature |
0˚C ~ 40˚C |
Storage Temperature |
-20¢ªC ~ 60¢ªC |
Operating Humidity |
10 ~ 90% |
Storage Humidity |
10 ~ 90% |