7" Mobile Data Terminal with ARM Cortex-A9 platform, 1024 x 600 pixels, 500nits, 4-wire resistant touch, On-board DDR3L 2GB (Model: NVD700-AR)

Main Feature

- 7" 1024 x 600 TFT LCD monitor with resistor touch screen
- ARM Cortex-A9 Dual Core Processor with 1GHz frequency
- Compact and fanless design
- On screen F1 ~ F5 programmable function keys
- Linux and Android operating system
- GPS/Wi-Fi/3G/LTE supported (Dead Reckoning included)
- iButton & RFID for ID identification
- Dual CAN Bus 2.0B
- OBDII (ISO15765-4)/SAE J1939 protocol
- Wide Range DC input from 9 ~ 36V
- SW Utility for function demonstration on Android platform
- CE/FCC/Emark

Specifications
Download
Contact Sales

LCD Panel

7-inch TFT LCD Panel with LED Backlight
1024 x 600 pixels
Brightness: 500 cd/m² (typical)
Contrast ratio: 800:1 (typical)
Viewing angle: 150(H), 145(V)

Touch Screen

4-wire resistant touch
Anti-glare coating surface
Transmission rate: 80% ± 3%

CPU & Chipset

ARM Cortex-A9 Processor with 1GHz frequency Freescale Dual Core

Memory

On-board DDR3L 2GB

Storage

1 x Micro SDHC Slot
EMMC: 8G on board

Expansion

1 x half-size mini-PCIe (PCIe + USB) for WLAN
1 x full-size mini-PCIe (USB + UART) for WWAN
OBDII: ISO15765-4 & SAE J1939 (Default: None, BOM optional)
RFID (optional)

I/O Interface-Front

F1 ~ F5 programmable function keys
Light Sensor
Internal Mic-in
2 x Built-in 2W speakers
3 x LED indicators (Power, Storage and WWAN)

I/O Interface-Lateral

Right side
- 1 x SIM card slot
- 1 x Micro SD card slot
- 1 x USB 2.0 type A
- 1 x micro USB OTG for maintenance
Left side
-1 x Power button
-1 x Volume up/down
-1 x Brightness up/down
-1 x System reset button

I/O Interface-Rear/Bottom

1 x lockable power input with ignition
1 x RJ45 for LAN

2 x USB 2.0 Type A
DB-15 connector
- Full RS-232
- RS-232/485
- CAN1 2.0B
DB-15 connector
-GPX x 3
Sink type: 5VDC TTL (default)
Source type: 3 ~ 28VDC
- GPO x 3
Sink type: 5VDC TTL (default), max current: 20mA
Source type: 3 ~ 28VDC, max. current: 150mA
- GPS DR (Speed, direction, GND)
- CAN2 2.0B (Default) & (BOM optional for OBD II (ISO 15765-4 & J1939))
- iButton
1 x Mic-in
1 x Line-out
3 x Antenna on I/O
-Rear: 1 x GPS, 1 x WWAN
-Bottom: 1 x GPS, 2 x WWAN
2 x Antenna on housing for Wi-Fi

Mechanical

Cooling System: Fanless
Enclosure: Plastic PC/ABS + Metal heat-sink
Mounting: VESA 75/100 & Desktop mounting
Ingress Protection: Front panel IP54
Dimension: 212.9mm (W) x 144.97mm (H) x 40mm (D)
(8.4" x 5.7" x 1.6")
Weight: 1.3kg

Power Management

9V~36V DC input
Selectable boot-up & shut-down voltage
Ignition: 8-level delay time on/off
Reverse protection/over-voltage protection/low-voltage protection
Wake up by SMS/RTC/ignition

Environment

Operating temperatures: Ambient with air -20°C ~ 70°C
Storage temperatures: -30°C to 80°C
Relative humidity: 10% to 90% (non-condensing)
Vibration
-Vibration test: IEC 60068-2-64, 2.5G
-Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
-Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24
Shock
-MIL-STD-810G, 516.6 Procedure 1, trucks and semi-trailers=40g
-Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g

Certification

CE/FCC class B/E-Mark

Data Sheet

Sales Inquiry
	Sales Phone:	888-483-2418/Press 2 510-226-9226/Press 2

	Email:	sales@itechlcd.com

7" Mobile Data Terminal with ARM Cortex-A9 platform, 1024 x 600 pixels, 500nits, 4-wire resistant touch, On-board DDR3L 2GB (Model: NVD700-AR)