LCD SIZE |
RESOLUTION |
LUMINANCE |
VIEWING ANGLE |
CONTRAST RATIO |
MAXIMUM POWER CONSUMPTION |
8.4" TFT AMLCD |
SVGA (800x600) |
800 nits |
160° (H) x 140° (V) |
900:1 |
30 Watts |
TECHNICAL SPECIFICATIONS |
Display |
8-bit color, 16,777,216 colors. TFT AMLCD (Thin-Film Transistor Active-Matrix Liquid-Crystal Display) |
Dimming Ratio |
3000:1 |
Video Inputs |
Composite Video (4), Auto Sensing NTSC, PAL-BGHID Formats; DVI-I/VGA (2) |
Video Outputs |
Composite Video (1) |
Housing |
Milled Aluminum, Black Hard Anodized |
Mount Options |
Corner, Panel, RAM, VESA (75mm), Side (12.1”-15.0” sizes); Quoted individually. |
Wide Range DC Power Input† |
10-36 VDC (12, 24, 28 VDC nominal) |
Power Conditioning |
Protected against Internal Short Circuit, Load Dump, Over Voltage and Reverse Polarity |
ENVIRONMENTAL SPECIFICATIONS |
IP Rating |
IP67 (NEMA 6 Submersible) |
Operating Temperature |
-40°C to 71°C (-40°F to160°F); (-20°C (-4°F) with Touch Option) |
Storage Temperature |
-51°C to 71°C (-60°F to160°F) |
Humidity |
0-100% |
Altitude |
45,000 ft. |
MILITARY SPECIFICATIONS |
MIL-STD-461 |
EMI |
MIL-STD-810 |
Method 512, Immersion |
MIL-STD-704 |
Aircraft Power Requirements |
MIL-STD-810 |
Method 512; Immersion |
MIL-STD-810 |
Method 500; Altitude |
MIL-STD-810 |
Method 513; Acceleration |
MIL-STD-810 |
Method 501; I & II; High Temperature |
MIL-STD-810 |
Method 514; Procedure I, II, V, VI; General Vibration |
MIL-STD-810 |
Method 502; I & II; Low Temperature |
MIL-STD-810 |
Method 516; Procedure I, Functional Shock |
MIL-STD-810 |
Method 503; Temperature Shock |
MIL-STD-810 |
Method 520; Temp, Humidity, Vibration, and Altitude |
MIL-STD-810 |
Method 505; Solar Radiation |
MIL-STD-1275 |
Vehicle Power Requirements |
MIL-STD-810 |
Method 506; Rain |
MIL-STD-1472 |
Thermal Contact Hazard |
MIL-STD-810 |
Method 507; Humidity |
MIL-STD-3009 |
NVIS Compatible (Optional) |
MIL-STD-810 |
Method 508; Fungus |
MIL-PRF-22885 |
Sunlight Readability for Push Buttons |
MIL-STD-810 |
Method 509; Salt/Fog |
MIL-A-8625 |
Standard Finish, Type III, Class 1 & 2 |
MIL-STD-810 |
Method 510; Blowing Sand and Dust |
MIL-PRF-22750 |
Painted Finish, Optional, Minimum Quantity Required |
MIL-STD-810 |
Method 511; Explosive Atmosphere |
MIL-DTL-26842 |
(and 38999) Connector, Qualified |