AMD 12.1" Open Frame LCD with Dual Ethernet FanLess PC Computer SBC. Model (WOPC1210L1-A-DL)

AMD 12.1" Open Frame LCD with Dual Ethernet FanLess PC Computer SBC. Model (WOPC1210L1-A-DL)

AMD 12.1" Open Frame LCD with Dual Ethernet FanLess PC Computer SBC. Model (WOPC1210L1-A-DL)

WOPC1210L1-A-DL
  • Overview
  • Download
Features
■ 12.1" TFT LCD Solution
■ AMD LX800 500 MHz CPU, Fanless Design
■ Integrated LVDS/ VGA function
■ 1 x DDR SODIMM, max. 1GB
■ Dual Fast Ethernet (Optional Giga Ethernet)
■ 1 x Mini PCI(Optional), 1 x Type I/II CF socket, 2 x SATA 1.0
■ 4 x COM, 4 x USB 2.0
■ Ultra Slim Profile: Less than 60 mm (2.36")in depth
System Specification
Form Factor 3.5"
Processor AMD Geode LX-800 500MHz Processor
System Chipset AMD CS5536 Companion Device
System Memory 1 x 200-pin SODIMM, max. 1GB (Default 256MB)
BIOS Award 4Mbit
VGA Controller On-board VGA/LCD Controller
VGA Memory Shared memory, max.64MB
LCD Support TFT LCD
Ethernet Realtek RTL8110c Chipset
Audio Realtek ALC203 AC97 Chipset + AC97 codec
IDE 1 x IDE (UDMA 33/66/100)
SATA 2 x SATA 1.0
Serial 3 x RS-232, 1 x RS-232/422/485*
USB 4 x USB
KB / Mouse Connector 1 x PS/2
Expansion Slots 1 x Mini PCI(Optional), 1 x Type I/II CF socket
DVD Optional No
HDD 2.5 inch 40GB
OS Optional Windows XP Professional / Embedded, Linux
Power Adapter DC IN 12V or 19V
Environment Environment & Dimensions
From Factor 3.5"
Temperature Operating : 0 deg.C to 45 deg.C
Humiduty 30% to 90% non condensing
LCD Panel Specification
Viewable Size Image 12.1"
Active Display Area 246.0 (H) x 184.5 (V)
Pixel Pitch 0.3075 (H) x 0.3075 (V)
Pixels 800x600
Contrast Ratio 500:1 (typ.)
Display Color 262,144 (6bits/color)
Brightness 400 (typ.)
Viewing Angle -70~70 (H); -50~60 (V)
Recommend Resolution 800x600@60Hz, 75Hz
Power source AC110~240V,Universal, ±10%
Power Consumption 15W typical, normal operation
Power Management VESA DPMS Compliant
Plug Play VESA DDC 1/2B
Optional TouchScreen Resistive
Note: All Specifications are subject to change without prior notice!
*If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.