AMD 12.1" Panel Mount LCD w/ NEMA4/IP65 Lower Power FanLess PC. Model (WPMC1210-IPM3-A)

AMD 12.1" Panel Mount LCD w/ NEMA4/IP65 Lower Power FanLess PC. Model (WPMC1210-IPM3-A)

AMD 12.1" Panel Mount LCD w/ NEMA4/IP65 Lower Power FanLess PC. Model (WPMC1210-IPM3-A)

WPMC1210-IPM3-A
  • Overview
  • Download
Features
.12.1" TFT LCD Solution
.AMD LX800 500 MHz CPU, Fanless Design
.Integrated LVDS/ VGA function
.1 x DDR SODIMM, max. 1GB
.Integrated 10/100 Mbps BaseT Ethernet
.1 x Mini PCI(Optional), 1 x Type I/II CF socket, 4 x COM, 4 x USB 2.0
.Ultra Slim Profile: Less than 60 mm (2.36")in depth
System Specification
Form Factor 3.5"
Processor AMD Geode LX-800 500MHz Processor
System Chipset AMD CS5536 Companion Device
System Memory 1 x 200-pin SODIMM, max. 1GB (Default 256MB)
BIOS Award 4Mbit
VGA Controller On-board VGA/LCD Controller
VGA Memory Shared memory, max.64MB
LCD Support TFT LCD
Ethernet Realtek RTL8110s Chipset
Audio Realtek ALC203 AC97 Chipset + AC97 codec
IDE 1 x IDE (UDMA 33/66/100)
Serial 3 x RS-232, 1 x RS-232/422/485* (1x RS-232 on backside I/O)
USB 4 x USB ( 2 x USB on backside I/O)
KB / Mouse Connector 1 x PS/2
Expansion Slots 1 x Mini PCI(Optional), 1 x Type I/II CF socket
DVD Optional No
HDD 2.5 inch 40GB
OS Optional Windows XP Professional / Embedded, Linux
Power Adapter DC IN 12V or 19V
Environment Environment & Dimensions
From Factor 3.5"
Temperature Operating : 0 deg.C to 45 deg.C
Humiduty 30% to 90% non condensing
LCD Panel Specification
Viewable Size Image 12.1"
Active Display Area 246.0 (H) x 184.5 (V)
Pixel Pitch 0.3075 (H) x 0.3075 (V)
Pixels 800x600
Contrast Ratio 1000:1 (typ.)
Display Color 262,144 (6bits/color)
Brightness 450 (typ.)
Viewing Angle -89~89 (H); -89~89 (V)
Recommend Resolution 800x600@60Hz, 75Hz
Power source AC110~240V,Universal, ±10%
Power Consumption 20 W typical, normal operation
Power Management VESA DPMS Compliant
Plug Play VESA DDC 1/2B
Optional TouchScreen Resistive
Note: All Specifications are subject to change without prior notice!
*If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.