VAMP-1

2U 4" Composite Video & two channel Analog Audio Monitor (model: VAMP-1)

2U 4" Composite Video & two channel Analog Audio Monitor (model: VAMP-1)

VAMP-1
  • Overview
  • Download


Click to enlarge

Features:

  • Video & Audio Monitoring in 2U
  • 4? Color LCD Video Screen - Auto NTSC / PAL
  • Self-Powered Speaker System
  • Level Meters & Phase - High-Resolution 53-Segment Tri-Color LEDs
  • Single Group of Two Audio Channels
  • Internal or External Speaker Switch (No Amplifier Needed)
  • Headphone Jack (mutes speakers)
  • Low Power Consumption
  • SDI/AES Digital version also available (VAMP-2 SDI)
  • Other Analog Version with A/B switching available (VAMP-24)
Specifications  
Peak acoustic output 100 dB SPL (@ 2 ft.)
Electrical response 20Hz - 20kHz ? 1dB
Acoustic response, 1/6 octave 170 Hz - 16 kHz (?5 dB) (-10dB @ 140Hz, 20kHz)
Speaker amp power output 20 W transient / 11 W cont RMS each side (4 ohm)
Distortion, electrical Less than 0.1% at any level below limit threshold
Distortion, acoustic Typically less than 1.5% at frequencies above 200 Hz; 6% or less at worst case
Hum and noise More than 70 dB below full output
Input Composite Analog - IV pk-pk NTSC/PAL Auto-sensing
Display Resolution 480H x 230V
Screen type, size TFT 4" Diagonal
Controls Brightness, Chroma, Tint, Contast
Magnetic Shielding <0.4 gauss any adjacent surface
Weight 17 lbs. (7.7 kg)
AC mains power requirements 100-25-VAC, 50/60Hz auto select
Power consumption (avg,max.) 60W
LCD lamp life 10,000 hours (min.)
15,000 hours (avg.)
Dimensions (HxWxD) 3.5 x 19 x 12 inches (89 x 483 x 298mm)