2 Mega-Pixel 21.3" monochrome LCD suited for CT and MRI images with apability to display 2048 shades of gray simultaneously. (Model: ME253i2)

A high-performance model not only offers high image quality and high-accuracy, but also is loaded with quality maintenance management features

---

A 2MP display best suited for CT and MRI images.Loaded with a high luminance, high contrast LCD panel, it delivers excellent image quality with a luminance uniformity compensation feature and a capability to display 2048 shades of gray simultaneously. It also comes with a hardware-based pivoting function for fast image display in portrait orientation.

Features:

Newly developed luminance stabilizing system λ-Sentinel II

λ-Sentinel II consists of a luminance sensor and luminance control circuit. The luminance sensor that is attached in front of the screen constantly monitors and accurately stabilizes luminance on the screen surface by sending feedback to the control circuit.

Remote grayscale check and remote calibration functions

Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators. * An optional PM Medivisor software is required

Simultaneous display of 2048 shades of gray

Combined with a viewer software, 2048 shades of grapy (11 bit) can be simultaneously displayed. It realizes smoother grayscale display required for medical image displays. * A viewer software that supports TOTOKU's multi-shade display system is reguired for 11-bit simultaneous display

Luminance equalizer λ-Uniformity Congruence

Is built in to achieve highly accurate luminance uniformity across the screen. Luminance unevenness is minimized in the final tune-up prior to shipping. * Images shown are for illustrative purposes only

Clear base/Blue base LCD panels

The LCD panels are available in both clear and blue base colors.

Calibration function

Calibrates luminance and gamma to enable smooth grayscale display that is faithful to DICOM GSDF. * An optional calibration kit is required.

Hardware pivot function for fast drawing in portrait on landscape orientation

Stress-free operation is made possible by the fast drawing speed even in portrait orientation

Color/monochrome conversion function for multi-display setups with both color and monochrome display

Color/monochrome conversion function for multi-display setups with both color and monochrome displays

OSD Information Display

With a push of a button, the display's current status can be checked such as the display model, total operating time, actual measurement of luminance, and calibration settings.

LED indicator to inform of current status

A glance at the LED indicator tells you the display's current operating status

Enhanced convenience with utility software :Advanced power saving*

The backlight dims as the screensaver starts, reducing power consumption and preventing unnecessary deterioration of the backlight. * This feature may not be available, depending on the specifications of the graphics card used. Gamma check 18 points of luminance values are measured and plotted into a graph. Ambient light and display luminance measurement The built-in illuminance and illuminance sensors measure display luminance and ambient illuminance

Worldwide medical safety standards

This display is certified under various medical safety standards that are much more demanding than those for general-purpose IT equipment

Specifications:

Model name		ME253i2 /C (clear base), ME253i2 /B (blue base)
LCD	Technology	21.3-inch, Monochrome, TFT active matrix
	Display Area	432mm x 324mm
	Pixel Pitch	0.270mm x 0.270mm
Visual Perfomance	Contrast Ratio	700:1 (typ)
	Maximum Luminance	1800cd/m² (typ), (calibrated to 410cd/m² by factory default)
	Viewing Angle	170
	Available Resolution	Resolution USTEXT, 640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA)
	Grayscale Display	12 bit (3826 shades of gray) to 256 shades of gray Simultaneous display of 11 bit(2048 shades of gray) is possible with the customized viewer
Input Signal	Input Sync Signal	DVI 1.0 compliant
	Plug and Play	DDC2B compliant
Input Power Supply	Input	AC Adapter 100V-240V (±10%) 50/60Hz
	Maximum Power Consumption	85W (typ), (with power management feature
Features	Calibration Control	Luminance, Gamma, Capability of saving 3 sets of LUT settings (An optional calibration kit is required.)
	OSD Information Display	Model name, Serial No., Total operating time, Calibration settings (Operating time from Last Calibration, Luminance, Gamma, etc.), Current luminance, etc.
	USB Hub	USB Rev. 2.0 compliant, Self-powered USB upstream connector(x1), USB downstream connector(x2)
	Other Features	Luminance Uniformity Correction Function, Hardware Pivot function, Color/Monochrome conversion function, LED indicator
Standards		UL60601-1, CSA C22.2 No. 601.1, MDD/CE, FDA510(k), FCC-B, VCCI-B, MIC, ( CCC: pending)
Physical Characteristics	Dimensions (WxHxD)	Landscape:474mmx 468.4/529.9mmx220mm <br>Portrait: 367mm x 521.9/583.4mm x 220mm
	Weight	Net: approx. 11.6kg, Without tiltstand: approx. 7.4kg
	Tilt Stand	Tilt, Swivel, Portrait / Landscape
	Mount	100mm VESA compliant
	Security Slot	On the back of the panel and the tilt stand
Accessories		AC adapter, Power cord (3P), DVI cable, USB cable, User manual