SITEMAP Live Chat

IP65/NEMA4 Panel Mount (Aluminum-6mm) 8.4 " LCD Monitor LED VGA+DVI Input, Rear OSD, 4-Wire Resistive Touch (Model: YPM0840PHB-TR)

IP65/NEMA4 Panel Mount (Aluminum-6mm), 8.4 " LCD monitor, 800 x 600, 1000 nits LED VGA + DVI Input, Rear OSD, including rear Clamp mount/VESA Mount, rear OSD, 4 wire resistive touch with USB controller

IP65/NEMA4 Panel Mount (Aluminum-6mm), 8.4 " LCD monitor, 800 x 600, 1000 nits LED VGA + DVI Input, Rear OSD, including rear Clamp mount/VESA Mount, rear OSD, 4 wire resistive touch with USB controller

Inquiry/Quote Request
YPM0840PHB-TR
  • Overview
  • Specifications
  • Download

Features:
  • Sunlight Readable
  • Suitable for military, tablet, ruggedized PC, kiosk, advertising, POS, marline, transportation, gaming, gas pump
  • Suitable LED Backlight
  • SVGA (800x600)
 

Clamp Mount
 

Installation Guide for Panel Mount Product:
You better have at least 2 people to do the installation. One is at the front side of the mounting wall, another is at the back side of the mounting wall.
 
 
1. Get the Mechanical Drawing :
You can get the mechanical drawing of your product model from our web site : www.itechlcd.com . If you can't find the correct mechanical drawing, contact your local dealer.

2. Make the cut out :
There is the cut out dimension in the Mechanical Drawing. Make sure your cut out meet the cut out dimension requirement. If the cut out is too small, there will be some interference. If the cut out is too big, you can't have the panel
mounting securely. Please note that there is thickness limitation of the mounting wall for panel mount installation.

3. Prepare the accessory :
For panel mounting kit installation, you will receive mounting kits and screws together with your unit and you have to prepare the screw driver by yourself. There are at least 2 mounting kits for each side of the panel. The mounting kit and the screw is paired.

4. Installation :
4-1. Put the monitor in the cut out from the front side of the mounting wall. The best way to mount the panel is to align the bottom of the panel housing with the bottom edge of the cut out. This way can help hold the panel steadily.
 
 
4-2. At the back side of the mounting wall, insert the mounting kits into the slide hole at the side bracket on the panel.
4-3. Put the screw on the mounting kits and screw it tightly.
4-4. Finish all the mounting kits one by one then you can have a secure installation for your Panel Mount product.
 
System Specifications
Panel Type 8.4-inch TFT LCD
Screen Diagonal 8.4-inch
Active Display Area (mm) 170.4 (H) x 127.8 (V)
Pixel Pitch (mm) 0.213 x 0.213
Number of Pixels 800 * 600
Contrast Ratio 600:1
Color Arrangement R.G.B. Vertical Stripe
Brightness (cd/m˛) 1000 cd/m˛                                *without touch screen
Viewing Angle(Typ.) 80/80/80/60 (R/L/U/D)
Signal Connector 15 PIN D-Sub, DVI-D
Power Source AC100 ~ 240V, Universal +/- 10%
Power Consumption 18 W typical, normal operation
Power Management VESA DPMS Compliant
Operating Temperature -30°C ~ 85°C
Storage Temperature -20°C ~ 60°C
Plug & Play VESA DDC 1/2B
Touch Type Resistive Touch Screen
Transparency > 80% (typ.)
Hardness of surface 3H
Linearity ±1.5%(max.)

PRODUCTS

Solutions

News Room

Resources

Quality Icon

High Quality Parts

i-Tech company uses only the best Industrial LCD and High Quality embedded Panel PC parts along with rugged components in USA or imported from Korea and Taiwan , for most reliable quality that you can trust!

Customer Services

Customer Service

i-Tech customer service reps are here to help you with your inquiry for Industrial monitors, panel pc, and outdoor LCD. From any general questions to technical support, we leave you feeling completely satisfied with our excellent LCD quality as well.

USA Icon

US Based Company

Most of i-Tech’s High Brightness LCD and Rugged Panel PC Products are assembled, tested and shipped from our very own factory in CA USA, giving us the ability to customize the systems to your needs.