3 Mega-Pixel 20.8" color LCD high quality images with maximum luminance of 600 cd/m˛ and contrast ratio of 600:1. (Model: CCL352i2)

A high-performance model not only offers high image quality and high-accuracy, but also is loaded with quality maintenance management features.
With high luminance and high contrast, and an integrated color calibration function, our CCL352i2 delivers highly accurate color reproduction faithful to the DICOM GSDF. The CCL352i2 includes a luminance compensation feature for edge to edge consistency, is fully configurable for multi-display applications, and comes standard with hardware-based pivot functionality for fast image drawing in portrait orientation.

Features

Luminance stabilizing system to provides continuous stable display for medical images

Remote grayscale check and remote calibration functions
Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators.
* Optional PM Medivisor software is required.

Auto remoto grayscale conformance evaluation Combined with TOTOKU’s performance monitoring software PM Medivisor, grayscale conformance to DICOM according to AAPM TG18 can be checked automatically and remotely.
PM Medivisor’s scheduling function activates periodic auto-evaluation. The test runs as a background process. Thus it can be carried out even when the display is in use. Results are available graphically for easy review and are centrally managed by PM Medivisor.
Remote calibration capability The remote calibration feature is added to reduce the burden on system administrators. Calibration of remote displays canbe accomplished from a management terminal.
Execution of calibration using the built-in luminance sensor. Results are centrally managed by PM Medivisor. * Remote calibration is available when "i2 model" is used along with PM Medvisor Ver. 4.0 and above.

High luminance, high quality LCD panel
600 cd/m² and contrast ratio of 600:1. Due to its wide, dynamic range, high quality grayscale can also be achieved on this color display, providing versatility for multi-modality workstations.



Calibration function to accurately adjust gamma, color temperature, and luminance
Medical image displays are commonly required to display grayscale according to the Grayscale Standard Display Function (GSDF) defined by DICOM Part 14. The calibration function creates the optimum conditions for a medical imaging display by adjusting luminance levels, color temperature, and grayscale characteristics to achieve DICOM GSDF compliant grayscale output.

Models supported: All ME/CCL Series models, except ME183L and CCL192 plus
Note: Calibration requires an optional calibration kit*

How it works
The calibration function corrects the driving level of the LUT (Look-up Table), a memory that specifies the LCD driving, and writes it in the LUT. In other words, calibration adjusts grayscale characteristics, color temperature (color displays only), and luminance.



Built-in LUT (Look-up Table) to reproduce beautiful grayscale and TOTOKU's technology for simultaneous display of multiple shades
General-purpose displays are capable of 256 shades of gray, but due to unevenness and grayscale discontinuity, they cannot reproduce and display the subtle shading difference required for medical image displays. TOTOKU's medical image displays display the most appropriate 256 shades (8bit) out of a maximum of 12241 shades of gray using the built-in LUT. This technology realizes much finer and smoother grayscale than possible with general-purpose displays.

Moreover, combining with a TOTOKU display customized conversion table with an integrated viewer, up to 2048 shades of gray can be provided to produce film-like images on the display.



Hardware based pivot function to enable high speed drawing in portrait orientation
The pivot function allows for a 90-degree rotation of the LCD panel into portrait orientation. Unlike other pivoting functions that are implemented using graphics cards and/or that require special software, TOTOKU's hardware pivot function is directly implemented in display hardware, and thus it is much faster with less noise.

Dual Link input
provides smooth display of motion pictures.







Enhanced convenience with utility software : Advanced power saving
* The backlight dims as the screensaver starts, reducing power consumption and preventing unnecessary deterioration of the backlight.
* This feature may not be available, depending on the specifications of the graphics card used.
Gamma check
18 points of luminance values are measured and plotted into a graph.
Ambient light and display luminance measurement
The built-in sensors measure display luminance and ambient illuminance.

Specifications

Model Name		CCL352i2
LCD	Technology	20.8-inch, Color, TFT active matrix
	Display Area	423.9mm x 318.0mm
	Pixel Pitch	0.207mm x 0.207mm
	Contrast Ratio	600:1 (typ)
	Maximum Luminance	600cd/m² (typ), (calibrated to 250cd/m² by factory default)
	Viewing Angle	170° horizontal and vertical (typ)
Visual Performance	Available Resolution	USTEXT, 640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 2048 x 1536 (QXGA)
	Color Display	Full color (16.77 million colors)
Input Signal	Input Sync Signal	DVI 1.0 compliant
	Plug and Play	DDC2B compliant
Input Power Supply	Input	AC Adapter 100V-240V (±10%) 50/60Hz
	Maximum Power Consumption	130W (typ), (with power management feature)
Features	Calibration Control	Luminance, Gamma, Color temp., Capability to save 3 sets of LUT settings (A calibration kit is required.)
	OSD Information Display	Model name, Serial No., Total operating time, Calibration settings (Operating time since the last calibration, Luminance, Gamma, Color temp., etc.), Current luminance, etc.
	USB Hub	USB Rev. 2.0 compliant, Self-powered USB upstream connector (x1), USB downstream connector (x2)
	Other Features	Luminance Uniformity Correction, Hardware pivot, LED indicator
Standards		UL60601-1, CSA C22.2 No. 601.1, MDD/CE, FCC-B, VCCI-B, FDA510(k)
Physical Characteristics	Dimensions (WxHxD)	Landscape: 474mm x 468.4/529.9mm x 220mm Portrait: 367mm x 521.9/583.4mm x 220mm
	Weight	Approx. 11kg (Approx. 6.8kg without tilt stand)
	Tilt Stand	Tilt, swivel, landscape/portrait rotation
	Mount	100mm VESA compliant
	Security Slot	On the back of the panel and the tilt stand
	Protective Filter	Antireflection-coated
Accessories		AC adapter, 3P power cord, DVI cable, USB cable, User manual

Dimensions